What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 08:53

There are two important concepts here.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This one hit behind the barn.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Do foreign workers face discrimination in Canada?
The third is lightning and “how it gets conducted into a home.”
In schematic diagrams this is the symbol for a fuse:
These are simplified answers to the original question, and does not change anything I wrote above.
What is a fun psychological trick to try on someone?
But it can get overloaded, and no longer works.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Why do I sweat so much at the gym?
what exactly is a ‘surge’ protector?
2024–10–16 [ OO OLAOYE OYEBODE ]
For this case there are devices called Metal oxide varistors (MOV).
What thing happened to you as a child that you haven’t let go of to this day?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
a photo is worth a thousand words.
A circuit breaker is similar, but is resettable.
Barnstars:
2024–10–14 [Omar Gharbi Omar Gharbi ]
Why did you put a guy’s dick in your mouth the first time?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–10[John johnson John Johnson ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Why are leftist movements so popular among young people?
The other is “what does a “fuse” do?”
One
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Why is digital marketing important?
Edit 2024–10.
It seems Mohan does not understand the difference between a comment and an Answer.
[old diagram got deleted by accident]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
An AC voltage/ current source, and an ac inductive load.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is where the MOV conducts again, and dissipated the energy.
First Sentence:
Upvotes:
One is “what exactly is in a ‘surge protector’ ? ”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But… the neutral is now “floating” because of the 1 ohm resistance.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
so, what happens?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What is lightning?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
eight
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
(Dc diagram shown, AC is similar).
Because the load is inductive, the current lags the voltage.(by a bit).
Now when you have a certain ac resistance, then a current flows in a loop.
He then describes the function of a fuse.
He then asserts :
I post the exact comment here.
nine
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What does a fuse do?
but this device (an Inductor) … impedes the rapid changes in the current.
These devices are installed between the “hot” and “neutral” and protective ground.
the problem then depends on "how fast does the fuse operate?".
[image of Common-mode choke]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This device then solves the entire problem.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is 'the assistant's answer'
It also is a device that limits the change in current flow.
A fuse is a non-resetable over current circuit protector.
He then describes Rainy Season and Lightning.
At one ohm, the resistor has a maximum of 1 watt power.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
but I think this circuit , shows a few more pieces.
At least they know the answer if they wanted it.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There are three different concepts here that are getting confused.
The bolt then partially travels down the line to your home.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So, the voltage could go up to 500 volts, and the fuse will not open up.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Here is a simplified AC power diagram.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.